LunaSea Mods
LunaSea Mods LunaSea Mods LunaSea Mods LunaSea Mods LunaSea Mods
$600.00

Price may vary to each product selected.

Each Mod is very unique in their own way.

1. Talisman

Features:
The Talisman is a mechanical, dual 18650 wood box mod.  Each Talisman was created to give the owner the ability to see both worlds clearly, the Spiritual and the Physical.
"As is Above, So is Below."
Talisman mods are built on a Luna 2 frame that use batteries in parallel.  The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set.  Each Brazilian eye agate stone is hand picked and polished to a high luster.  Copper inlays are acid etched then hand formed to give each devices its unique texture and artistic appeal. The triggers are hand formed then riveted onto a solid Brass ball, formed and split at the end. The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Next LunaSea installs the internals with solid copper wiring soldered to the connections. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Finally the trigger is installed and the unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.


Specifications

  • Designed and manufacturer in the US
  • Made from exotic woods, brass, copper and Brazilian eye agate
  • All woods are imported from Africa, Central/South America, or Brazil
  • Copper inlay is acid bath etched then textured and finished by hand 
  • Requires two 18650 batteries to operate (2x Samsung 25R batteries are included with purchase)
  • Unique Side Fire Switch

2. Luna V3 DNA 75

Features:
The Luna 3 is powered by a DNA 75 chip that requires one 18650 li-ion battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax. Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.

Specifications

  • Designed and manufacturer in the US
  • Made from dyed and stabilized burl woods, brass and/or copper
  • Requires one 18650 battery to operate (1x Samsung 25R battery is included with purchase) 

3. Luna V3 DNA 200
Features:
The Luna 3 is powered by a DNA 200 chip that uses one 11.1 volt lipo battery to operate. The design was inspired by the Golden Ratio and the Cycles of the Moon. The box is machined on a CNC and the "C" wrap is machined and engraved on a four axis CNC mill then bent on a custom made Die set. The discs are cut with an EDM wire machine for an exact fit.  All Luna 3's are made from dyed and stabilized burl, mostly Buckeye, Black ash, maple or box elder.  The wood blanks start with a dip into Tung Oil and left to dry then the magnets and discs are glued into the machined holes. The wood blanks are fit to the "C" wraps and secured with small brass wood screws. Then comes all of the hand work on sandpaper that is glued onto slabs of Stone to create a flat sanding surface to finish and detail the boxes. Once this is complete and all edges are eased they get a final go over on a Scotch Brite pad then several hand applied coats of Renaissance Wax.  Each unit is tested for several firings with a dry coil and inline voltage tester to ensure each mod functions as good as they look.

Specifications

  • Designed and manufacturer in the US
  • Made from dyed and stabilized burl woods, brass and/or copper
  • Powered by one Fully Max 900mAh 11.1V lipo battery

Disclaimer: Advanced products are for experienced vape enthusiasts with extensive knowledge of how electronic devices work along with access to the appropriate safety tools. Please ensure proper precautions are taken when using these devices as to not cause damage and/or harm to the atomizer, device, or yourself.